Bed Slats Split Frame King Size 3/4″ Thick Heavy Duty Multi-Ply Plywood Platform Replacement Boards – Custom Width with White Strapping

Description

Made by TheFurnitureCove
Materials: wood, webbing

Bed size: king us/ca
This king bed platform will provide the support you need for most specialty sleep beds and several other types of mattresses. Use these under your box spring (directly on bedframe) or between your top mattress and boxspring for a maximum support experience.

They provide a firm foundation with the wide boards connected approximately 4″-5″ apart and the Plywood is 3/4″ thick and about 5 plys with rounded smooth edges. (you will receive two sets for the split king)

Lay these directly on your bed frame, rails or existing slats and increase your firmness and support.
They are held together with a strapping material to keep the platform in position. Please measure the width of each split side (should be the same) of your bed prior to purchasing your slats. Allow 1/8″ play on each side of the split bed frame when measuring to allow a bit of wiggle room when placed.

Approximately 80 inches long that should be sufficient for both King and California King beds.

* Two Plywood Sets
* 3/4″ Multi-Layer Sheet Plywood
* Strong Support
* For Both Split King and Cal-King Beds
* Shipping Included in Price
* Use Directly on frame or Between Mattresses
* Superior Strength

If you don’t see the size you need for your bed, please contact us and we will be happy to see if we can meet your specific request.

Cat not included! All beds shown are for samples that these platforms can be used on and are NOT included. You will receive platform slats only.

**DISCLAIMER: We are not affiliated with any bed manufacturers**